7
 
SMC-SP 2~10HP/220V
SMC-SP 2~15HP/380V
L:145mm

W:83mm

H:120mm
   
 
   
 
 
Function Introduction Characteristic Models  
Soft start pump motor controller of SP series.
7Time and torsion can be adjusted when starting to make starting smoothly
63 starting ways can be choice in one machine: the standard series have the slope starting, current-limiting starting, kick starting.

5Use SCR control: without connecting points, arc light, smooth face wearing, or use-life forever similarly。

4Wiring easy: installation of 3 in 3 out, save the coast of hand wiring.

3This controller has phases and 3 wires' SCR to transform control of power.

2This controller is micro-controller with the function of automatic light/heavy loading revision and turning moment control.

1Cooling fans has temperature control, the cooling sheet working at 55oC, and stop at 45oC, this design can extend use-life of fans 2-3 times. .

1This controller has CT electronic inspection protector: the standard series have the protection of overload, loss phase, motor block, over heating, motor running idling(Low load), high sensitivity, without heating effect, not influenced by the temperature around.
.
1The machine has 3 sets output connection points: the standard series have the output point when starting, by Pass, and output point for system abnormal.
.
1This machine has slow stop function for pump motor to create best water hammer removing function.t.

1This starter starting tool is tally with the specification of CE, IEC60947-4-2 standard.

 

 
1
Jaki Enterprise Co., Ltd

Address: No.11, Lane2, Rencih St., Dali City, Taichung County, Taiwan, R.O.C
TEL: 886-4-24915501
FAX: 886-4-24954240 
Emailjaki.cpu@msa.hinet.net
1
Wan Ji Enterprise Co., Ltd

Address:No.11, Lane2, Rencih St., Dali City, Taichung County, Taiwan, R.O.C
TEL:
886-4-24966570
FAX: 886-4-24963807
Emailjacky.cpu@msa.hinet.net